FedRAMP Low, Moderate and High: Choosing a Class Today
Searching for FedRAMP Low, Moderate or High is still a useful starting point. The current provider decision, however, is about a certification class, while agencies continue to categorize their own information systems by impact.
In this article
Main question
How do FedRAMP Low, Moderate and High relate to current certification classes?
Updated October 26, 2026.
Searching for FedRAMP Low, Moderate or High is still a useful starting point. The current provider decision, however, is about a certification class, while agencies continue to categorize their own information systems by impact.
FedRAMP explicitly says there is no direct correspondence between certification class and impact level. An agency's security objectives, tailoring and intended use affect how a cloud service fits into its system. Official class guidance.
Separate the agency's impact level from your class
FIPS 199 addresses the consequences to an agency of losing confidentiality, integrity or availability. FedRAMP explains that agencies use that categorization and FIPS 200 to establish the overall impact level and appropriately tailored controls for their systems. FedRAMP explanation of FIPS 199 and FIPS 200.
For a provider, ask which certification profile supports the intended agency use. Avoid turning “we handle this kind of data” into an automatic Class C or Class D conclusion without examining the actual customer requirement.
| Question | Decision it informs |
|---|---|
| What will the agency use the service for? | The relevant security objectives and operating context |
| What assurance does the customer need? | A suitable certification class |
| What implementation model fits the offering? | Rev5 or 20x |
| Which path is available for that profile? | Program or Agency Certification |
| What work already exists? | Reusable implementation and assessment material |
How Classes A, B, C and D relate to agency needs
FedRAMP describes the following general alignment; it is not a guarantee that a particular agency will accept a particular offering. Class-to-use guidance.
| Class | General agency-use alignment |
|---|---|
| A | Most non-sensitive use cases and some Low, Moderate or High security objectives |
| B | Most Low objectives and some Moderate or High objectives |
| C | Most Low and Moderate objectives, plus some High objectives |
| D | Most use cases regardless of security objective, excluding classified information |
The same guidance recommends Class A as the initial option in many situations for established commercial products with mature security programs and SOC 2 Type II work. It cautions against starting directly with Class C or D without an existing agency contract requiring that commitment. Starting-class guidance.
For the commercial-entry decision, see FedRAMP for startups.
Class does not settle the certification type or path
The current path table lists 20x Classes A, B and C on Program Certification. Rev5 Class A is unavailable. Rev5 Classes B and C generally use Agency Certification, with limited Program exceptions; Rev5 Class D uses Agency Certification. 20x Class D is listed as coming in 2027. Certification paths.
Keep all three fields in a planning document: type, class and path. “We are doing Moderate” leaves too much unresolved for an implementation plan or assessment quote.
The Rev5 versus 20x decision guide explains how existing-provider status and the application timeline affect the choice.
Use the current applicable requirements
Control counts are a poor substitute for scoping the actual work. The Rev5 certification rules identify the applicable baseline controls by class. Rev5 requirements.
The 20x rules address KSI verification and validation with class-specific expectations. 20x requirements.
Create a scoped inventory with the rule or control, applicability, implementation owner and evidence. Record exceptions and unresolved decisions explicitly. This is more useful than planning from a generic control-count table copied from an older article.
Compare the operating commitment before choosing
When comparing two profiles, examine the work to maintain them as well as the initial submission. Ask who will own vulnerability response, package maintenance, assessment coordination and customer reporting.
Boundera's CR26 walkthroughs help teams work through applicable requirements. Its uploaded Rev5 control workflow supports implementation information and verification and validation statements. KSI walkthroughs support 20x implementation work.
Use the cost-by-class guide to compare the project scope, or book a demo to walk through your current implementation.
Frequently asked questions
Is Class C exactly the same as Moderate?
No. FedRAMP says certification classes do not directly correspond to agency impact levels. Check the offering, agency use and assurance needs together.
Is Class A available for Rev5?
The current path table lists Rev5 Class A as unavailable. Class A appears on the 20x Program Certification path.
Next step
If you want to turn this guidance into an execution plan, the product side handles control mapping, SSP drafting, and evidence collection.
Related articles
FedRAMP Cost by Impact Level: Budget by Class and Path
Compare FedRAMP budgets by current class and path. Separate reusable work, implementation gaps, assessment scope and ongoing costs.
How to Convert a FedRAMP POA&M into the 2026 Vulnerability Detail Report
Step by step: how a Rev 5 POA&M and its deviation requests become the FedRAMP Vulnerability Detail Report and Accepted Vulnerability Info, which fields you must add, and what does not carry over.
Top 6 Platforms to Meet the FedRAMP VDR and VER Deadline (December 7, 2026)
FedRAMP's VDR and VER rules become mandatory on December 7, 2026. Here are the six platforms providers evaluate most for them, what each automates, and where each fits.